The wire mesh pad is by a continuous filament woven. When the metal mesh pad for two pieces of metal plate between
We can produce high performance EMI shielding effect.
We used four basic types of metal wire to weave, such as monel wire, wire, tin copper coated steel wire and stainless steel wire.
The four metal SiDou have their own characteristics, but generally think tin copper clad steel wire is most suitable for EMP shielding.
Application:
The wire mesh pad is not as the core with rubber wire mesh pad that is flexible, it is easy to happen compression deformation. We generally all the metal mesh pad for a fixed between metal plate. The wire mesh pad only limited environment seal, general is suitable only for not exposed in situations. If we in all the metal screen outside again add a layer of liner rubber ring, so it will extend the service cycle, and it's also better resistant temperature. In order to be able to get the best effect, the metal mesh pad should be compressed to their natural state the high degree of 20-25% range. For those who un-even surfaces can not be implemented this situation, use a rubber core wire mesh pad will be a better choice. All the metal screen shielding liner can through the conductive adhesive "(metal wire point of contact to penetrate film) or welding grooves or within fixed in aperture. In order to
Easy to embed a and riveting, take the flanks and dual core round shape profile
Tolerance:
Usually the tolerance of all sizes of plus or minus 0.8 mm.